• Kreg T-slot Track

Save kreg t track to get e-mail alerts and updates on your eBay Feed. 1000mm Aluminium T-Track T-Slot Miter Jig Fixture Tool Woodworker Router Table. The Kreg 48-Inch Heavy-Duty Track is a heavy-duty L-shaped, anodized aluminum extrusion ideal for commercial-grade applications. It features four T-slots that securely interface with the head of a standard 1/4-inch hex bolt, and the top of the track contains a recess for attaching a 1/2-inch wide self-adhesive measuring tape. An adaptation of our other popular styles of Trak, Mini Trak features a T-slot that captures the head of a standard 1/4' (6mm) hex bolt. The Mini Trak you have selected is 48' (1219mm) long. Compatible with Kreg Track Clamps. Not for use with Kreg Bench Clamps. This Trak contains four T-slots that accommodate the head of a standard 1/4' (6mm) hex bolt. A 1/2' (13mm) recessed indentation runs along the top and front side of the Trak for easy application of a self-adhesive measuring tape (sold separately). Product Details The Mini Trak can be used to produce countless types of woodshop jigs and fixtures, such as taper jigs and cut-off sleds. An adaptation of our other popular styles of Trak, Mini Trak features a T-slot that captures the head of a standard 1/4' (6mm) hex bolt. The Mini Trak you have selected is 48' (1219mm) long.

Nylon set-screws along the length of the bar adjust with the turn of a screwdriver to take up any play in the miter gauge slot. Machined mounting holes to attach the miter bar to your jig or...

Compare With

• Quick View

  Model ACS1000

  $499.99

• Quick View

  Model KMS7448

  $43.99

• Quick View

  Model KMS8000

  $144.99

• Quick View

  Model ACS-TTOP

  $349.99

• Quick View

  Model KMS7509

  $20.99

• Quick View

  Model ACS435

  $29.99

• Quick View

  Model KMS7704

  $65.99

• Quick View

  Model KMS7714

  $38.99

• Quick View

  Model KMS7102

  $149.99

• Quick View

  Model KMS7801

  $32.99

Details

Nylon set-screws along the length of the bar adjust with the turn of a screwdriver to take up any play in the miter gauge slot. Machined mounting holes to attach the miter bar to your jig or fixture. Perfect for building workshop jigs and fixtures.

• 3/4' wide x 3/8' thick x 30' long, fits most miter gauge slots


• Pre-machined mounting holes every 4' along the length of the bar


• Six adjustable nylon set screws included to eliminate play in miter slot


• Constructed of heavy-duty aircraft-grade aluminum.


• Great for shop-made jigs like a table saw sled

Reviews

1. 5.0 out of 5 stars

   This is perfect for jigs

   I use these bars for my cross cut sled, and all of my jigs. The set screws give me a tight miter track fit with zero slop. Stop wasting time milling runners that will expand seasonally and buy these. You will be happily surprised.

2. Best one in my comparison

   Finally, an accurate miter bar! I bought three different miter runners made by two manufacturers (all items sold by Woodcraft) for a crosscut sled, and this Kreg runner is my pick of the bunch. Two features make it the best 1) it's longer (30') than the other two runners, and 2) the 8 adjustment spots to adjust for accurate fit in a miter track allow for a no-slop fit throughout its travel. It uses 8 threaded nylon inserts for adjusting fit, (not 6 as mentioned in the description). After a simple adjustment, it runs freely in the slot and still has almost no side-to-side play. The other manufacturer's runners don't have as many adjustment points for fit, so there's a little more sideways slop as the bars run the length of the slot. The fact that the Kreg is 30 inches long also helps accuracy. I still have the other two miter runners (one extruded aluminum bar with jam wedges underneath that adjust the width, and one steel bar with plastic adjustment disks for width), but this Kreg is the one that I'll use.

Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw blade. Our Precision Trak and Stop Kit is designed to take the guesswork out of cutting wood to length. This kit contains 8’ (4 – 2’ sections) of anodized aluminum trak (also available separately that can be mounted to a shop made support wing built to the height of your miter saw. A ½” self-adhesive tape is then applied to the top of the fence. Finally, slide the Flipstop and Production Stop onto the top of the trak and you have a precision cutting station that eliminates the need for a tape measure and pencil. Simply place the precision lens cursor over the board length desired, press the board against the stop, and cut away! Precise, repeatable cuts could not be any easier.

Kit Includes:

Kreg T-slot Track

• 4 ea. 2' pieces of Trak
• 1 ea. Swing Stop
• 1 ea. Production Stop
• 1 ea. 12' length of L-R reading sel-adhesive tape
• 1 ea. 12' length of R-L reading self adhesive tape
• Detailed instructions
• Mounting hardware.